Ask Singapore Homework?
Upload a photo of a Singapore homework and someone will email you the solution for free.
Question
secondary 3 | A Maths
5 Answers Below
Anyone can contribute an answer, even non-tutors.
need help with these qns, for qn13 i got positive answer instead of negative (number same but wrong signages), for qn18 i cant find cos45 only
other qns i dont know how to start
got confused as i have never seen these qns before
now? if you are not free later also can :)
See 5 Answers
can we add a negative sign by ourselves for this qn? i thought 3 and 4 must be positive as the fraction given is positive
For the vertical line of the triangle, this exists below the horizontal axis, so its "length value" must be assigned to be negative.
For the horizontal line of the triangle, this exists to the left of the vertical axis, so its "length value" must be assigned to be negative.
As for the diagonal hypotenuse, its length is always positive no matter what.
for the questions in this chapter do we usually find where the triangle lie on? as i never thought of finding it and just continue with the question using the information tanx = 3/4
In the first quadrant, both the vertical and the horizontal lines are positive.
In the second quadrant, the vertical line is positive while the horizontal line is negative.
In the third quadrant, both the vertical and the horizontal lines are negative.
In the fourth quadrant, the vertical line is negative while the horizontal line is positive.
as the y axis is negative, we can add a negative sign even if we will get a positive answer when doing trigo?
The cosine in the fourth quadrant is unaffected and should be positive.
Today I won’t be free to answer forum questions.
The fourth part is very hard for me to explain in regular terms, and I am not sure if this should even be asked at this juncture (once you learn about the addition angle formulae at a later part of trigo, part d should be doable without doing a further diagram like I did there).
By inspection, 1.2pi radians is actually equal to 216 degrees. This compares to 0.2pi radian which is actually equal to 36 degrees.
And we know that 216 is an angle whose basic angle is 36.
It’s all the same idea as the degree version, but it does take time to adapt to the radian version of the angle.
(also dont really understand part d but i saw what you typed so i guess its ok)
If you have converted 1.2pi to degrees, you will get 216 deg.
In other words, they told you that cos 216 = -k. We need to find out the value of cos 0.2pi, or cos 36.
In other words, we need to obtain the value of cos 36, given that cos 216 is -k.
We soon realise that 216 is an angle in the third quadrant, with basic angle 36. This means that the triangles for 36 and 216 are identical in numbers, but not in signages.
Clearly a cosine in the third quadrant and a cosine in the first quadrant, with the same basic angles, will have different signages but otherwise the same numerical values.
So, if cos 216 = -k, then cos 36 = k.
So, if cos 1.2pi = -k, then cos 0.2pi = k.
But first, before calculating tan (-0.2pi), we first need to have tan 0.2pi ready. So, what is tan 0.2pi?
We previously obtained cos 0.2pi as k. To obtain the value of tan 0.2pi, you will need to draw the quadrants triangle for 0.2pi (first quadrant). Since cos 0.2pi = k, we set the hypotenuse as 1 and the adjacent side as k. The opposite length would then be sqrt (1 - k^2).
Then, from there, we find that tan 0,2pi = [sqrt (1 - k^2)] / k.
Since -0.2pi is an angle in the fourth quadrant with basic angle 0.2pi, it follows that tan -0.2pi (tan in the fourth quadrant) will have a negative value. Compare this with tan 0.2pi which clearly has a positive value.
So, tan (-0.2pi)
= - tan 0.2pi
= - [sqrt (1 - k^2)] / k
Alternatively, you can draw the quadrants triangle for -0.2k directly, if that would be easier for you.
To understand this, your concept of coordinate geometry has to be very strong, especially for the section involving perpendicular lines.
If a line connecting (0, 0) and (3, 1) is rotated 90 degrees anticlockwise about the pivoting point (0, 0) for example, how will the new position of the line be like?
If you have done this correctly, you will see that (0, 0) remains put, but the point (3, 1) will go to (-1. 3). This is reflective of the fact that the gradients of two perpendicular lines is equal to -1 (or perhaps it's the other way round).
Initially, the x-distance from (0, 0) to (3, 1) is 3 units long, while the y-distance from (0, 0) to (3, 1) is 1 unit long. After rotation, the positions are swapped - that is, the x-distance is now 1 unit long while the y-distance is now 3 units long. Any line rotated 90 degrees in this manner will have their x-movements and y-movements swapped. Of course, the x-movement is -1 rather than +1, which is rather clear here.
For this question in part d, the idea is likewise similar. The lengths k and sqrt (1 - k^2) will get swapped in their identities. The new k will become the vertical length while the new sqrt (1 - k^2) will become the vertical length. The negative sign attached to sqrt (1 - k^2) is indicative that the horizontal length is now on the negative side to the left of the y-axis.
Clearly the hypotenuse remains 1 because the length of a line is not affected by any rotation.
The other question, probably I look at it tmr